Industrial Fans

We produce top quality centrifugal fans, axial fans, and fan auxiliary equipment and accessories designed specially for each process, that can be used in every branch of industry, and produced according to international norms and standards.

Fan Engineering

Choosing the most suitable fan for your needs is done by Selnikel's expert engineers according to the system and process in which the fan will be functioning, and other special factors depending on your needs. Then we complete the design using our own software and start manufacturing.

Contact Us

Centrifugal Fans

Single and Double Suction

General Features

  • Flow Rate: 100 – 1.000.000 m3/h
  • Pressure: 0 – 30.000 Pa
  • Gas temperature: -30, +500°C
  • Electric motor power: 1,1 – 5.000 kW manufactured up to these capacities.

Fans, according to area of use:

  • Big Capacity and Special Fans
  • Material Carrying Fans
  • High Pressure Fans
  • Hot Gas Recirculation Fans
  • Abrasion Proof Fans
  • Leak Proof Fans

Double Suction Fans

Double suction fans are used when fan capacity needed is more than 300.000m3/h.

Axial Fans

Operating under lower pressures than centrifugal fans, axial fans can be produced in different capacities depending on your needs.

  • Flow Rate: 100 – 1.500.000 m3/h
  • Pressure: 0 – 1.500 Pa
  • Gas temperature: (direct coupled) -30, +60°C
  • Gas temperature: -40 , +250°C

Contact Us

Dust Collection Systems

For a cleaner world, 99% of industrial dust produced is collected by Selnikel’s dust collection systems. In this way, not only do we act against pollution, but also we minimize material losses caused by dust dispersion.
  • High dust emission efficiency, (99.99%)
  • Automated operation and decontamination control, (PLC)
  • Low management and maintenance costs,
  • Low tire differential system designs (120-150mmSS)

Dust Collection System Designs

For a cleaner world, 99% of industrial dust produced is collected by Selnikel’s dust collection systems. In this way, not only do we act against pollution, but also we minimize material losses caused by dust dispersion.
  • High dust emission efficiency, (99.99%)
  • Automated operation and decontamination control, (PLC)
  • Low management and maintenance costs,
  • Low tire differential system designs (120-150mmSS)

Jet- Pulse Systems

The term ‘Jet-Pulse’ refers to a method for cleaning baghouse filters. Mechanical-shaker and reverse air filters are normally included in baghouse filters category.

Cyclonic Jet Pulse Filters

Cyclonic Jet Pulse Filters are used in medium capacity dust collection systems where dust load is high. They are usually preferred due to their high efficiency and durability.

Cartridge Filters

Cartridge filters, due to their low capacity and dust load, are used when the area for installation is limited,

Cyclone Filters

Mainly used for collecting big dust particles, cyclones are not as efficient for small particles.

Turn-key Dust Collection System Design

- Physical Site Visit

- Need Identification

- Capacity and System Engineering Calculations

- Detail Engineering and Project Designing

- Production and Material Acquisition

- Automation System Design and Software

- Design and Production of System Equipments e.g. Gas Channels, Pipes

- Transportation

- Installation

- Implementation and Training

Engineering Services

Choosing the most suitable fan for your needs is done by Selnikel's expert engineers according to the system and process in which the fan will be functioning, and other special factors depending on your needs. Then we complete the design using our own software and start manufacturing.